• ESD safe hang tag. Cut your own hang holes.
• A 2-1/4” x 2-1/4” (Insert Size) inside pouch prevents the label from getting wet.
• Dissipative Rs: 1 x 10⁶ to < 1 x 10¹¹ ohms per ANSI/ESD STM11.11
• Tribocharging: Less than 100 volts
• Includes inner anti-print, non-ESD vinyl liner which will prevent ink transfer from your label to the tag.
• Can fit a folded 8.5” x 11” paper.

Cutting Instructions:
  1.  Measure the size of the neck on the bottle.
  2.  Cut the hole on the side of the hanger without the pocket.
  3.  Hang the tag on your bottle.